To navigate through the various pages of the documentation category, use the menu on the left.
TECHNICAL SPECIFICATIONS

MECHANICAL TESTS | VALUES |
---|---|
1) COMPRESSION TEST: (UNI EN 1926:2000) | da 90 a 115,7 N/mms² |
2) BENDING TEST: (UNI EN 1339; UNI EN 13748-2) | 10,6 N/mms² |
3) SLIP TEST (METHOD B.C.R.A): | |
COEFFICIENT OF FRICTION RUBBER ON WET SURFACE: | µ = 0,80 |
COEFFICIENT OF FRICTION LEATHER ON DRY SURFACE: | µ = 0,85 |
(required value – D.M. 14/06/1989 n. 236 Par. 8.2.2 - µ > 0,40) | |
4) WEAR TEST for sliding friction: | |
R.D. 16/11/1939 n. 2232 - Relative abrasion coefficient: | 0,67 mms. |
R.D. 16/11/1939 n. 2234 art. 5 - Average wear value: | 2,8 mms. |
5) FROSTY TEST’: law DIN 52104 | Material used in no frost |
SLIP RESISTANCE TEST: | |
law DIN 51130 (06/2004) | R13 |
The non-slip finishes of the Monostrato Vulcanico of Etna are not made by using a mould, but by working with diamond tools for finishes "E" type and "F" type or by using shot blasting steel ball for finishes "B" type and "M" type, this technique carried out in such a way, conveys to the product a unique aesthetic effect allowing it ot maintain its nature of non-slip flooring lasting over time. |
---|
Non-slip E (Process achieved by diamond utensils and velvety effect in a semi-circular grooves.). Finish not available for sizes 300x400mms - 300x500mms. |
Non-slip B (Bush Hammered type). |
Non-slip B.L (bush hammered light tipe). |
Non-slip M (hammered type). |
Non-slip F (finishing fine type). |
400x400 mms. - 300x400 mms. - 300x500 mms. |
SIZES MADE BY CUTTING: |
200x400 mms. - 200x200 mms. - 100x400 mms. - 100x200 mms. - 100x100 mms. |
![]() |
20 mms = 50 kg ca. (on request) 30 mms = 80 kg ca. 50 mms = 120 kg ca. 60 mms = 145 kg ca. 80 mms = 193 kg ca. 100 mms = 240 kg ca. |
![]() |
![]() |
Marking CE - (UNI EN 13748-2) |